Technology

Our technology

The product line consists of three standard models. All series are based on the same technology though designed to fit different quantity demands. While the Aquablu One model purifies on demand, the Aquablu Pro model provides you with a specific volume at any given time.

To ensure the quality of the water that is purified by our systems, all are fitted with the latest monitoring technology. Unlike existing purifiers on the market, Aquablu brings safety and transparency to the water industry. Aquablu users, as well as Aquablu dealers, can at any point check the status of their system. This helps customers in times of troubleshooting and prevents unnecessary visits!

Three stage purification

All systems are based on three stages: pre-filtration, purification and remineralization. As all purifiers are based on the same technical principle, the Aquablu One animation will be used to provide a step by step explanation:

  1. Contaminated water flows through our pre-filtration kit to remove large contaminants
  2. The water enters the system and is pressurized over our unique spiral wound membrane. Customisable to every raw water quality, our membranes remove contaminants up to 0.0001 micron in size. This includes viruses, antibiotics and micro-plastics
  3. By monitoring over 96 parameters, the Aquablu App gives you a direct insight into the quality of your drinking water, as well as the technical status of your system
  4. Water that lost in the purification process is rejected by the system
  5. Before the water reaches the tap, extra minerals are added by our remineralization cartridge to ensure great taste (Alkaline 8)

Our different membranes

According to the raw water quality, each system can be fitted with a different membrane, reaching from Ultra Filtration to Supreme Osmosis. Both the settings and membrane can be fully configured/adjusted towards the customer’s needs. Membrane filtration is a pressure driven technology with pore sizes ranging from 100 molecular weight to 5 microns.

Ultrafiltration (UF)

Ultrafiltration is used for water that does not need thorough filtration like RO or SO and is commonly used to purify water supplied directly from the mains. Ultrafiltration takes out contaminants such as viruses and bacteria. The ultra membrane has the lowest percentage of reject water (10%) and the highest flow of our three membranes.

Supreme Osmosis (SO)

Our Supreme Membrane has a smaller pore size compared to our Ultra membrane, allowing fewer contaminants to pass. Supreme Osmosis removes all harmful contaminants, while retaining minerals that RO would otherwise remove. The Supreme Osmosis membrane has less reject water (20%) and double the flow of RO.

Reverse osmosis (RO)

Reverse Osmosis is capable of removing up to 99%+ of the dissolved salts (ions), particles, colloids, organics, bacteria and pyrogens from the feed water. The RO membrane is our strongest membrane and therefore very effective in treating brackish, surface and groundwater. Due to the thickness of the filter, the RO membrane has the highest percentage of reject water (35%) and a lower flow compared to SO.